High-power 140W integrated amplifier
Drive your loudspeakers with 140 Watts of power per channel into 4 Ohms. This integrated amplifier offers compatibility with the widest range of speaker types and impedances for operational stability.
Advanced AL32 Processing Plus
Advanced AL32 Processing Plus supports digital audio sources up to a high resolution of 384-kHz/32-bit. The algorithms restore information that was lost during the digital recording to ensure detailed playback.
USB-DAC
PMA-1700NE provides a USB-DAC function that supports high-resolution audio signals up to 11.2-MHz DSD and 384-kHz/32-bit PCM. These digital signals with suppressed jitter will get passed on to the high-quality DAC for an optimal D/A conversion with the highest precision.
TECHNICAL SPECIFICATIONS:
General
Unit (W x D x H) 434 x 410 x 135mm, 17.1 x 16.1 x 5.3in
Cabinet Size (W x D x H) 434 x 374 x 135mm
17.1 x 14.7 x 5.3in
Net weight: 17.6kg 38.8lb
Packaging Dimensions (W x D x H): 548 x 520 x 249mm, 21.6 x 20.5 x 9.8in
Packaging gross weight 20.4kg, 45lb
Carton Color: 2 Color
Cushion / Packing: 4 Separate / Sheet
Panel Color: SP / BK
Front (Center) Panel: Aluminum
Side cover: SECC with 4 straight emboss
Side screw: SP: Nickel / BK: Black
Rear Panel: SECC t1.0mm
Chassis Material: SECC t1.2mm
Bottom Layer: Single
Volume Knob: Aluminum
Input Selector: Aluminum
Bass/Treble/Balance/ Phono Sel knobs: Aluminum
Power button: Aluminum
Other knob/button (LOUDNESS, SOURCE DIRECT etc): Mold (Source Direct,Analog Mode,MM/MC)
Foot: ABS resin with rigid rib
w/Hot stamp
(H : 20mm)
Heatsink for Power Amplifier: Extruded Aluminum
Specifications:
Rated Output Power: 70W + 70W
(8ohm,20Hz-20kHz,THD0.07%)
140W + 140W
(4ohm, 1kHz, THD0.7%)
Speaker Impedance: A or B : 4 ~ 16ohm, A + B : 8 ~ 16ohm
Frequency Response: 5Hz - 100kHz (0~ -3dB)
Total Harmonic Distortion: 0.01 % (Rated output: –3 dB, 8 ohm/ohms, 1 kHz
Dumping Factor: 100 and over
Input Sensitivity: Phono input: MM: 2.5 mV / 47 kohm, MC: 200
RIAA Deviation: 20 Hz - 20 kHz ±0.5 dB (MM/MC)
Phono Maximum Input: MM : 130mV / 1kHz, MC : 10mV / 1kHz
Input Sensitivity: CD/LINE/RECORDER: 125 mV / 19 kohm
Input Sensitivity: Power Amp input: 0.85V / 47kohm (EXT. PRE)
Signal to Noise Ratio: PHONO (MM): (89dB)
PHONO (MC): (74dB)
CD: (107dB)
Tone Control BASS : 100Hz ±8dB
TREBLE: 10kHz ±8dB
Power Consumption: 295W
at Standby: 0.2W TV autoplay off
0.4W TV autoplay on
Audio Feature
Power Amplifier Circuit New UHC-MOS
Single Push Pull (7)
Power Trans: Dual El Core
Pre Amplifier Circuit: Variable Gain Preamplifier
(OP AMP)
Volume Electric
(MUSES 72323)
Bass / Treble / Mid / Balance Control: Yes / Yes / No / Yes
Type of Tone Control: Electric
Controlled by Potentiometer
Headphone Circuit: Use Poweramplifier
Source Direct: Yes
Analog Amp Mode: Yes (button on front panel)
Other: 70
DAC Circuit: PCM1795
Digital Filter: Fixed
Digital Processing: Advanced AL32 Processing Plus
DAC Master Clock Design (Not Support Network Playback): Yes
Asyncronous mode (for USB-B input): yes
Isolator (for USB-B input): Yes
Full Isolation
Connectivity
Phono Input: Yes (MM / MC)
*default=MM
Analog Input (include Phono) / REC Out (RCA): 4/1
(PHONO / CD / NETWORK ,AUX/ RECORDER)
Optical input / output (Maximum Support): 2 / 0 (192kHz/24bit)
Coaxial input / output (Maximum Support): 1 / 0 (192kHz/24bit)
Ext. Pre Input (Power Amp Direct): Yes(Ext.Pre)
2 sets of Speaker Output: Yes (Bi-wiring)
Speaker Terminal: Gold Plated
Headphone Output: 1
(Turn off the speaker when inserting headphone)
Remote Control Bus Terminal: Yes (mini)
AC Inlet : Yes
Wi-Fi: No
HEOS: No
USB B (USB DAC): 1 (Rear)
Module or Main Device New XMOS
(XU210-256-TQ128 )
PCM Sample Rate: ~384kHz/32bit
DSD Audio Streaming (DoP): ~11.2MHz
Roon Certificaton: Yes(Roon Tested)
TBD
Control:
Remote Controller: System Remote
(w/CD Player Control)
Unit control (Button): Push Switch: 1
POWER:
Tact Switch: 3
ANALOG MODE, SOURCE DIRECT, MM / MC
Unit control (Knob): 5
VOLUME, INPUT SELECTOR, BASS, TREBLE, BALANCE
LED POWER: 1 Red / Green
ANALOG MODE: 1 Green
SOURCE DIRECT: 1 Green
MM / MC :1 Green
Front Panel Display: Yes
(OLED 128 x 100 dot)
MXS4036-A
Display Language: Alphabetical
Dimmer for Front Display: Bright / Dim / Dark / Off
Control with App via Network Player (Use Remote Control Bus): Yes
TV Auto-play (Opt/Coax digital-in detecter): Yes
Last Function Memory: Yes
Auto Standby Mode: Yes
Owner's Manual: Web Manual
E2: (English, German, French, Italian, Dutch, Spanish,
Swedish, Polish, Russian)
E3: (English, French, Spanish)
E1C: (Simplified Chinese)
JP: (Japanese)
Paper
JP: (Japanese)
Quick Start Guide: Paper
E2: (English, German, French, Italian, Dutch, Spanish,
Swedish, Polish, Russian)
E3: (English, French, Spanish)
E1C: (Simplified Chinese)
JP: (Japanese)
Remote Controller: Yes
Battery Yes (AAA x2)
Power Cord: Yes
Denon PMA1700NE Amplifier (Silver)
(As much as we strive to quicker than 3 – 5 working days, please allow for potential delays during busier times – this will be communicated once your order is processed. *If you are in an outlying area, delivery could be delayed and take up to 10-14 days.)
Free Nation-Wide Delivery When You Spend R2000 Or More.
100% Satisfaction On Exchanges Or Returns.
Money-Back Guarantee On Products Returned Within 7 Days.
5-Year Warranty On Home Theatre Speakers.
2-Year Warranty On Receivers & Wireless Speak